| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.2.8 (17100804) | 3.2.8 (17100804) | 01/08/2019 - 10:10 | 215.85 KB |
- MOD: Modification 9.bit communication
- ADD: Support for new SPI flash (for future using)
| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.2.5 (16052201) | 3.2.5 (16052201) | 05/24/2016 - 14:02 | 215.85 KB |
Warning – it could cause different behavior in FW versions 3.2.0, 3.2.2 and 3.2.5.
-
After installation of fw v.3.2.2 the inputs states were changed to ON, in other words, inverted.
In this new fw the error (inversion of the input values) was fixed. The error can be found in all builds of 3.2.2. Please note that some application are for this error prepared and fix can cause more issues. For this reason we have possibility to enable the Inversion. There are two options:
From serial/TCP setup only via command #O2 (performs invert, default) a #O3 (do not perform invert, the same state as reported error)
| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.2.3 (15092410) | 3.2.3 (15092410) | 02/01/2016 - 13:27 | 215.85 KB |
- Fix: Network stability based on Cisco switch or similar improved
| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.2.3 (15081210) | 3.2.3 (15081210) | 08/12/2015 - 14:09 | 215.85 KB |
Fix: BIT/BYTE mode switching and bite inverter
| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.2.3 (15042708) | 3.2.3 (15042708) | 05/27/2015 - 09:27 | 215.23 KB |
- Fix: fixed bug, when was requested upgrade from www, and UDP mode was on
- Fix: fixed reaction on ARP
| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.2.3 (15031501) | 3.2.3 (15031501) | 03/17/2015 - 10:25 | 215.23 KB |
Fix: VMware compatibility
| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.2.2 (14083106) | 3.2.2 (14083106) | 09/02/2014 - 09:06 | 215.19 KB |
Fix: ModBus/TCP mode
| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.2.0 | 3.2.0 | 03/03/2014 - 09:59 | 204.02 KB |
Fix: 9.bit communication with variable parity
| Verze | Datum vydání | Velikost souboru | Ke stažení | |
|---|---|---|---|---|
PortBox2 / IP Relay HWg-ER02b / I/O controller2 / PortStore5 3.1.0 | 3.1.0 | 11/22/2012 - 13:31 | 191.92 KB |
Fix: UDP setup fix - a substantial upgrade requiring up to 2 firmware flashes. Will reset to default. Cannot be done remotely because you will lose the IP address!!!
Change: Login credentials. Now the default username is: "admin", password: "1234"
Fix: Oprava UDP setupu – rozsahly upgrade vyzadujici az 2x nahrati firmware. Provede reset to Default. Nelze delat vzdalene protože dojde ke ztrate nastaveni IP!!!!
Change: Prihlasovací údaje. Nyní defaultne username: „admin“, password: „1234“