The 2-channel pulse adaptor PadPuls M2 allows the use of up to 2 meters with pulse output as M -Bus slaves. So for example, data from a simple water or electricity meter can central be read out by M-Bus. Optionally the user can activate a tariff function, by which energy or volume pulses can be accumulated in separate meter readings for primary and secondary tariffs.
Accessories producer:
Relay GmbH
Product page:
| Tested with | Firmware | Result |
|---|---|---|
1.0.10 and later | OK
|
- Two separated pulse inputs
- Safe detection of up to 15 pulses per second at each input
- Pulse debouncing
- Pulse value free adjustable
- Plug-in terminals simplify the installation wiring
- Unit free selectable (e.g. Wh, kWh, MWh, kJ, m3, l,...)
- Counter length: 8 decimal digits
- Due-date function with integrated realtime clock
- One yearly value and 15 monthly values (optional)
- M-Bus protocol according to EN13757-2 and -3
- Fully parameterizable by M-Bus, including overwrite protection
- Transmission rate: 300 and 2400 baud with auto baud detection
- Fully operable in case of M-Bus failure by integrated battery
- Case for wall mounting W x H x D: 80 x 80 x 52 mm
- Two battery options available
- Protective class IP 54 (IP65 is possible)