Sensor overview - All Sensors

30A Current probe 1W-UNI 2

CO2 concentration, temperature and humidity interior sensor with RS485 interface

Temperature and humidity sensor for outdoor use.

Combined temperature and humidity probe for IT environment.

Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with thePoseidon family units.

Temperature and humidity sensor Htemp-485 Modbus RTU T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be therefore used alone or with Poseidon units.

Temperature and humidity sensor HTemp-485 T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.

Simple light intensity sensor for indoor use. The sensor is designed for use with Poseidon and Ares devices via 1-Wire UNI bus (RJ11).

Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be used alone, or with Poseidon units.

Temperature probe Pt100/B for low temperatures. Temperature range -190 to +150°C. PTFE covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm.

The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.

Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output.

Temperature, Humidity, atmospheric Pressure, TVoc sensor (-30 to 70 °C, 0 to 100% RH, 300 – 1 000 hPa, 0 – 60 000 ppb), indoor box with RJ11 (1-Wire UNI) interface.

Temp-1W-UNI Pt100 Cable

Temperature sensor (-10°C to +80°C)

High precision temperature sensor -50 °C to +200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments, agriculture and industrial applications.

Temperature sensor designed for the IT environment.

Outdoor temperature sensor with IP67 protection

Temp-485-Pt100 Box2

Temp-485-Pt100 Frost2

Security Door contact MK4 with 2m connection wiring.

Detector for indication of flammable gas presence.

Optical Smoke Detector FDR26 for smoke detection and fire alarm signalization.

PowerEgg2 detects failures of a power supply and can be also controlled with a relay.

SS14 detects shocks and vibrations.

3 phase 380V M-Bus energy meter for direct measuring (max load 63A). Pulses & M-Bus data output - 3x230V/400V, (5)63A.

Expansion module for connection of 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc. to the 1-Wire UNI bus (RJ11).

2x S0 datalogger and converter to M-Bus (2x pulse input (S0) / M-Bus output)

Single-phase electricity meter 100A with M-Bus

Three-phase electricity meter indirect measurement, MID approved. Pulses & M-Bus data output - 3x230V/400V, 100A.

Single-phase electricity meter 100A with ModBus

External Relay output 1W-UNI module allows to expand Ares 12 functionality by remote control of up to 4 relay outputs with a dry contact (NO/NC) capable of up to 50V / 1A load.