HWg-SH3: IP-based Rack Access Control System with RFID

Product canceled

HWg-SH3

HWg-SH3 is a cabinet IP Access Control System (ACS) with RFID interface. User database is configurable over the Web. Can be used as a stand-alone card access system with web management (Offline) or as a central cabinet Access Control System (Online).

Features:

You can open the door over the Web
RFID tag database can be edited over the Web
A door contact for detecting the state of the door (open/closed) can be connected
Uses an external RFID reader (127 kHz or 13.5 MHz support)
Detects entry with a key / forced entry / disconnected cable
Ethernet: RJ45 (10/100 Mbps)
WEB: Built-in Web server
Protocols: Syslog, SMTP
Electronic Swing Handles: Two HWg-SH1 (Southco H3-EM - Electronic Locking Swinghandle) supported
Inputs: 2 digital inputs for door contacts (front/back door)

Applications and usage:

Remote Cabinets Remote monitoring of cabinets RFID door lock system Remote access to Telco sites Rack door remote control Datacenter Access Control	HWg ACS (Access Control System) Highway technology sites Remote telecommunication cabinets Railway systems Pharmacies / Hospitals (addictive drugs) Power line network Water pipeline monitoring sites Gas pipeline monitoring sites Airports Military protected areas
Security systems IP surveillance systems Independent WEB access control system Technology cabinet remote monitoring

Horizontal menu

Technical Information

Protocols

HTTP:

YES

SNMP:

SNMP trap:

SNTP:

YES

SMTP:

SMTP TLS:

XML:

HWg-Push (SensDesk):

HWg-DCD:

YES

IPv6:

Modbus/TCP:

Net-GSM (SMS GW):

Sensors

Outputs:

Output type:

Swing handle SH1

Output load voltage:

Output load current:

100mA

Quantity:

RS-485 values*:

M-BUS items:

M-BUS meters:

RFID reader:

Comm monitor:

Virtual Values (conversions):

Calibration-shift:

Alarms

E-mail destinations:

E-mail templates:

Trap destinations:

Interface

Ethernet:

10/100Mbit

Mobile networks:

1-Wire:

RS-232:

RS-485:

Power and dimensions

Power supply:

Jack (barrel, inner 2,1 mm outer 5,5 mm)

Power supply:

12V

PoE/48V:

Optional

Operating environment:

-10°C – 60°C / 0%RH – 95%RH

Storage environment:

-10°C – 80°C / 0%RH – 95%RH

Dimensions:

98 x 78 x 31 (WxHxD)

Warranty:

24 months

Type

Environment:

Installation:

Table

IP Rating:

IP40

Housing:

Plastic

Others

SWITCH:

Virtual Serial Port:

Configuration:

Web

Software

Standalone Monitoring

HWg-Config / UDP Config

Accessories

Cable

Power jack cable 1m

Converter

LTE router LR77 v2 Libratum

Mounting Wall

3M Dual Lock fastener

Power

Back-Up power supply 12V

12V Wall plug adaptor – UK

12V Wall plug adapter – USA

Others

HWg-SH1: H3-EM Electronic Locking Swinghandle

ER75i EDGE router

Download

Download - group

Software & Firmware

Firmware:

HWg-SH3 ver. 1.0.7 - 17.09.2012 - Release history

HWg-SH3 is an autonomous cabinet access control system (ACS) with RFID. The database of authorized tags/cards can be managed remotely over the Web.
HWg-SH3 uses a local RFID reader and controls one or two swing handles (front and rear doors of a cabinet).

The unit can be used as a stand-alone offline solution independent from any software. HWg-SH3 can be also used in online mode with access authorization against the HWg-DCD application.

HWg-SH3 is typically used in a remote cabinet, rack or box, which may be accessed by a few authorized users only. Authorized users can be changed remotely over the Web interface.

Access Control system in practice

HWg-SH3 is a universal IP based Access Control System solution.

With HWg-SH3 + RFID reader, you can see who opened the doors – if it was “Mr. White” or “Mr. Black”.
With HWg-SH3, you can use both modes (Online or Offline).
Offline mode means that you can edit the database over the HWg-SH3 web interface.
Online mode means working against a central database. The HWg-SH3 contains a “White list” of users that is used if the connection to the server is not available. Database is then stored on the central server with all detailed rules (Mr. White can open doors only from 9am to 5pm).

Languages