HWg-Ares 10 / HWg-Ares 12 / HWg-Ares 14 / LTE version

• Fix: Fix sending input and output values
• Add support for EG912U modem, only modify type detection, otherwise everything is identical to EC21
• Mod: increase ssl buffer size to 6k, fix problem with large certificate
• Add: add SNI (Server Name Indication) settings for prohttps

Add: Watchdog modem registration to the operator's network

Fixed 1-Wire UNI sensor loading

Fix: problem with sending the Alarm message when the correct FRAM memory is not used

Fix: Fixing the state of outputs in Hwg-Push

• Sending DI status in HWg-Push

• Mod: Correction of sensor status calculation for HWg-Push

• Fix: Websocket connection
• Mod. 1-Wire timing
• Add: support for Push XML ver 4.1
• Fix: freezing of SMS reading in modem

Fix: Inicialization of inputs after device starting

• Fix: Sending false ends of alarm after device restart

Fix: Reading of old temperature sensor

• Mod: Edit xml parser. Newly, the removal of the Esc sequence is performed directly during the parsing process and not during processing.
• Mod: Modify portal tx, treat other parameters by converting Esc sequence
• Mod: Upgrade from Polarssl to embedtls ver 1.3
• Add: Support TLS v.1.2 and ECDHE code
• Add: Select for version of TLS in E-mail authorisation
• Fix: Sending false ends of alarm after device restart
• Mod: Increase number of sensors for Ares 10 devices to 6 values
• Mod: debug log for test e-mail writing version of TLS protocols
• Fix: HW processor error fix ERRATA -> 3.15 USB.1: USB_NEED_CLK is always asserted
• Mod: Tuning power down mode
• Mod: humidity measurement was converted to a single-pass algorithm
• Mod: redesigned sensor state machine to low power (converts are sent as broadcast)
• Fix: Manual push correction at zero push period. There was a loop.
• Mod: Improved algorithm for reading SMS from SIM. Incomplete SMS are deleted after 10 minutes.
• Fix: Improved protection against logging bad time into the portal log
• Mod: Increased measurement and processing period of the portal event when running from the battery for 30 sec
• Fix: fix algorithm to verify the presence of the sensor on 1wire
• Mod: The main loop when running from the battery is extended to 5 sec
• Mod: Add CSV type to periodic datalog.
• Mod: Improved USB performance

• Add: Support for stand-alone PushPeriod battery pack (for future use)
• Mod: Transition to xml version 4.05
• Add: Inserting DBhash into the configuration
• Mod:End of sending APlimit in the portal
• Add: SSL support
• Ass: Support for HTTPS push
• Fix: Datalog correction (pointer recalculation at wall)
• Mod: New Digital AresConf.exe signed
• Add: New autopush method for inputs (Now depends on the "Alarm Alert" option the Inputs page) + outputs in autopush
• Add: Forced push when portal output settings
• Fix: Apdelta synchronization from portal

• Add: Support for the Australian version of the modem

• Mod: Increased team length and password to 32 characters.

• Add: long pushlog (256kB) in nonvolatile memory
• Add/Mod: synchronisation saferange, hysteresis and delay between Portal and devices over HWg-PUSH protocol
• Mod: default configuration enhancements and subsequent automatic addition of a battery monitor
• Mod: Portal - login allowed without registering on the site
• Add: deletion of datalog at Device default

• Fix: response to incoming calls
• Fix: response to received SMS when SMS number is shorted then 7 octets

Fix: Closing GPRS connection

Fix: works with incoming message

FIX: ringout in LTE models

• Aresconf signed with certificate

• Unified version for GPRS and LTE versions
• Fixed calibration when working with decimal number

Fix: buffer overflow when insert too long offset in Calibration table

• Add text field for telefon number and note for general use - without specific function, only for future using
• Add macros %SRC_CNT% and %CNT_n for using values of input counters in SMS and e-mails messages
• Add timestamp to Push protocol with values of configuration saving for synchronisation local configuration with AresConf in Sensdesk Portal. 

• FIX: Repair issue with PUSH big values in float formats. Operation wasnt succesfully and device was periodical restarted. Emergency repair for this situation is removing SIM card, flash new firmware over AresConf (or coping firmware file to the Ares disc in your PC) and restart device
• Mod: Setings the time zone in 15min steps.
• Mod: Timeout extension for DNS communications.
• MOD: Work with battery management for longer battery lifetime (Ares12 and Ares14 only). Charging is not continuously, but is started when battery capacity decrrease under 80%. During charging Power LED blinking.
• Add: Reading SIMcard number and adding to the PUSH for specific aplications.

• Add: Calibration (shift) for sensors on new tab
• Fix: works with internal memory

• ADD: Macro %TABLE_OUTPUTS% pro use in SMS and e-mail templates
• ADD: Output status in Status SMS

Fix: Remote control 1-Wire Relay Output over HWg-PUSH (SensDesk)

NEW: Support long SMS and SMS in UTF-8

• Small  correct in some SMS commands

• Add: HWg-Ares10
• MOD: HWg-Ares12 has 14 sensors now

FIX: USB connection to PC

Fix: Incoming MMS causes the device to be restarted

Fix: gmx.net SMTP server

• Fix: GMX SMTP servers

• Fix: WWW opened twice when click on message from the Portal in the AresConf (AresConf application restart is requested)
• Fix: security of passwords in the setup.xml

• Mod: PUSH period sending changed                       
• Add: Repeating after unsuccessful PUSH added
• Add: Tag <ModemSigQ> was added to the PUSH protocol. This tag expresses GSM signal strength in 0-100% range.

• Fix: AT&T support
• Fix: Ofice 365 SMTP server support

• Fix: stability was Significantly increased vwen GPRS signal is low
• Add: HWg-Push extended by timestamp

• Fix: Working with negative values
• Fix: Freezing measuring after disconnecting the USB
• Add: Secundar address for data sending with HWg-Push added - for debug purposes only

Add: Same debug function

New features

• completely reworked way of working with IMEI value
• added data lock on configuration for access of more processes at a time
• Hidden serial number on a main page of the aresconfig on older models without the serial number.

Older and not yet featured changes

• Added pulse counter value of the digital inputs to values.xml
• Added periodal Email and SMS support
• Fixed datalog file naming in emails
• Added HWg-UNI2 sensor support
• Added Battery Shutdown Limit variable to the System tab. This feature shuts down the device in case the battery drains under the selected charge.
• Added option of saving and restoring the user configuration. Controls can be found on the System tab.
• Added option of saving the serial number.
• Restoring User default options fixed
• Tag name of the input counter in the push protocol changed to <Cnt>
• Button name AresConfigu Device Reset changed to Device Restart
• Fixed Status byte initialisation in push protocol. This bug was causing gaps in the data on portal when a connection was not established correctly, as the pushlog was erased afterwards although the data was not sent.
• Fixed random shutting down after connecting the USB cable while running on battery.

Add: Periodic Status function

Add support 4xBinary Input sensor Add Date value to email header.

Fix: Email SSL TLS problem with long certificate data file. Add new portal functions

* Fix Portal autorization * A longer numbers of the incoming sms

change: Portal protokol add: Portal autopush change: SSL code optimalization fix: icmp bug change: sms a email templates add: online template preview fix: Calibration code for UNI2 sensor add: Automatic shut off when the battery is weak change: Ares and AresConfig comunication change: XML parse optimalization

Time format fixed in the CSV report tag added to the setup.xml Added "PortalMessage" text on the Portal page Fixed MassStorage driver crashing under heavy load Periodic email timing fix Splitting long SMS to multiple messages

Fix: AresConfig in Win with 125% resolution Add: Export data to CSV format. Add: New AresConfig icon. Fix: USB HID communication. Fix: USB Mass storage, problem during PC Boot.

- supports SMS commands "TEST EMAIL" and "TEST LOGEMAIL"

Fix: Sensor hyst.

- FIXED: communication between HWg-Ares device and AresConf configuration utility

Fix: configuration will remain after upgrade. Fix: RTC driver.

- FIXED: a bug in ring out alghorithm - CHANGED: minimal Log Email Period is 1 hour; in AresConf this value is now entered in hours instead of previous seconds - NEW: a few improvements in AresConf

change setup.xml format fix configuration import

Many changed

- little changes in email format - now is supported by HWg-PDMS

-

1.0.5h

1.0.5f

add gsm upgrade