Sensors measuring Humidity (relative)
Primary tabs
The sensors you connect to the RJ11 port (1-Wire) or RJ45 port (RS-485) on the HW group monitoring device. The sensors provide a continuous value of, for example, -23.4 ° C or 32.7% RH. Device monitoring (SensDesk) can monitor the safe range of values and send an email or SMS alert when changing outside the value range. You can use sensors from the HW group only.
1-Wire
-
HTemp HomeBox
Combined temperature sensor -30 ° C to +70 ° C and humidity sensor 0-100% RH, for wall mounting RJ11 (1-Wire)
-
HTemp-1-Wire Outdoor
Temperature and humidity sensor for outdoor use.
-
HTemp-1Wire 3m
Digital temperature and humidity sensor for indoor and outdoor use.
-
HTemp-1Wire Rack 19
Combined temperature and humidity probe for IT environment.
-
HTemp-1Wire-Box2
Wall mount temperature and humidity sensor.
-
Humid-1Wire (1m, 3m, 10m)
Humidity probe (0 - 100% RH) designed for IT environment.
1-Wire UNI
-
Sensor CO2 1W-UNI
Combined Temperature (-0 to +50 °C), Relative Humidity (RH 0-95%) and CO2 (300 - 40000 ppm) sensor in one box. RJ11 interface (1-Wire UNI bus)
-
Sensor THPVoc 1W-UNI
Temperature, Humidity, atmospheric Pressure, TVoc sensor (-30 to 70 °C, 0 to 100% RH, 300 – 1 000 hPa, 0 – 60 000 ppb), indoor box with RJ11 (1-Wire UNI) interface.
Modbus/RTU (RS-485)
-
Htemp CO2 485-RTU RK-CHM-D
CO2 concentration, temperature and humidity interior sensor with RS485 interface
-
Htemp-485 Modbus RTU T3411
Temperature and humidity sensor Htemp-485 Modbus RTU T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Perseus units.
-
Htemp-485 Modbus RTU T3419
Temperature and humidity sensor Htemp-485 Modbus RTU T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be therefore used alone or with Poseidon units.
-
PHTemp-485 Modbus RTU T7410
Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be used alone, or with Poseidon units.
RS-485 HWg
-
HTemp-485 Box2
Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with thePoseidon family units.
-
HTemp-485 T3411
Temperature and humidity sensor HTemp-485 T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
-
HTemp-485 T3419
Temperature and humidity sensor HTemp-485 T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
-
PHTemp-485 T7410
Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be used alone, or with Poseidon units.