How to connect HWg WLD to a HWg-SMS-GW3 gateway

In addition to sending a SMS alert, the HWg SMS gateway can alert the recipient by dialing a call to the same number and letting it ring for a short time. This is a description how to connect HWg-WLD to the HWg-SMS-GW3. HWg-WLD detects water leaks or water floods along the entire length of the sensing cable. By placing the cable near possible flood sources, the whole area can be effectively monitored.

Horizontal menu

Support

1) First, open the HWg-SMS-GW3 web administration at the General setup tab. The most important parameters are IP Address and Port. Copy the IP Address (192.168.100.174 in this example) and enter it in HWg-WLD.

2) Once the IP address of HWg-SMS-GW3 is determined, open the HWg-WLD web administration interface at the Remote SMS tab.

3) Enable the SMS Gateway and enter the IP address, the port and the phone number for receiving notifications. If the HWg-SMS-GW3 is secured, also enter the username and password. Finally, enter the SMS text. Remember to save everything. Depending on the desired SMS format, the default text can be used.

4) Then, select the test to perform. Both variants should be tested. The information window displays a successful test result.

5) If the test completed correctly, go to the Sensors tab and enable the Remote SMS option.

Devices

IoT Monitoring

SD-WLD