In SensDesk, each sensor and device state has its specific color and icon. This scheme is consistent throughout the portal. Horizontal menuSupportIcons indicating the states of sensors and digital inputs/outputs State Color Icon Description OK Green Indicates an OK sensor – the sensor is sending a valid value that is within the safe range. Alarm Red Indicates a sensor in the Alarm state – the measured value is outside of the allowed safe range. Unknown Orange Indicates a sensor with an Unknown state – the sensor is connected but SensDesk does not yet have its configuration information. Invalid Orange Indicates a sensor in the Invalid state – the sensor is disconnected or otherwise damaged, and Sensdesk does not have valid information about its value, even though its device is communicating normally. Disabled Gray Indicates a Disabled sensor – the sensor is turned off for processing in Sensdesk configuration. The device works with it normally. Icons indicating device status State Color Icon Description OK Green Indicates that the device is OK – it is functioning normally and sending data. Alarm Red Indicates a device in the Alarm state – some of its sensors are in Alarm, the measured value is outside of the allowed safe range. Unknown Orange Indicates that the device state is Unknown – the device is already registered in SensDesk but its configuration and connected sensors are not yet known. Invalid Orange Indicates a device in the Invalid state – the device has not reported for more than 2 Push periods. Disabled Gray Indicates a Disabled device – the device has the Push function disabled but otherwise works normally. SoftwareSoftwareStandalone Monitoring SensDesk Technology SensDesk licences Mobile applications SensDesk Mobile
