Product map - Detector

The detectors you connect to a DI input (green connector), providing a value of 0/1. A typical example is a smoke detector with a relay output or a door opening detector (door open/closed). The monitoring device (SensDesk) can monitor the switching to the alarm value and send an e-mail or SMS alarm. You can connect detectors with relay output from any manufacturer to the HW group's monitoring device's DI input.

1-Wire UNI


Flood detector 1W-UNI 3m

Sensor WLD Relay 1W-UNI

Measurement

Measurement

Measurement Water detection Water detection
Technology: Resistor
Number of values provided 1 1
Inputs
Inputs type: Wet Contact
Quantity: 0
Counters: NO
Inputs type: Water Leak Detection zone
Quantity: 1
Counters: NO
Outputs
Output type: Relays standard
Load voltage: 120V AC/60V DC / 1000mA
Cable length 3 meter 3 meter
Galvanic isolation 0 0
Units Converter YES
Calibrated Points None

Power and dimensions

Power and dimensions

Power supply
Power supply: 5V / 10mA
Connector: RJ-11 (from 1-Wire)
Power supply: 9-15V / 20mA
Connector: Jack (barrel, inner 2,1 mm outer 5,5 mm)

Power supply: 9-15V / 20mA
Connector: Terminal Block

Power supply: 5V / 40mA
Connector: RJ-11 (from 1-Wire)
Operating environment -30°C ÷ 85°C / 0%RH ÷ 100%RH -30°C ÷ 85°C / 0%RH ÷ 100%RH
Storage environment -30°C ÷ 60°C / 5%RH ÷ 95%RH -30°C ÷ 60°C / 5%RH ÷ 95%RH
Depth 22mm 34mm
Dimensions 47mm / 37mm / 22mm / 71g 79mm / 68mm / 34mm / 122g

Type

Type

Environment Industrial, SoHo, IT Industrial, IT
Installation Table, Wall Table, Wall
IP Rating IP67 IP33
Connectors RJ11 RJ11, Terminal Block
Design Mural, Room, Dry contact Mural