Product map - Sensor
Primary tabs
The sensors you connect to the RJ11 port (1-Wire) or RJ45 port (RS-485) on the HW group monitoring device. The sensors provide a continuous value of, for example, -23.4 ° C or 32.7% RH. Device monitoring (SensDesk) can monitor the safe range of values and send an email or SMS alert when changing outside the value range. You can use sensors from the HW group only.
 WLD sensing cable A |
||
|---|---|---|
Measurement | Measurement |
Range: 0–1 switch Accuracy: 1 Resolution: 1.00 Technology: Resistor |
| Galvanic isolation | 0 | |
| Units Converter | NO | |
| Calibrated Points | None | |
Power and dimensions | Operating environment | 0°C ÷ 100°C / 0%RH ÷ 100%RH |
| Storage environment | -30°C ÷ 60°C / 5%RH ÷ 95%RH | |
| Depth | 10mm | |
| Dimensions | 2000mm / 18mm / 10mm / 53g | |
Type | Environment | Industrial, IT |
| Installation | Table, Wall | |
| Connectors | Terminal Block | |
| Design | Detect cable |