ethernet thermometer

STE2

Product canceled New product Available

STE2 supports up to 3 sensors connected over 1-Wire and up to two detectors via digital inputs for dry contacts.

A built-in web server is used for configuring. The device can be monitored remotely over the internet using the free SensDesk portal in combination with the SensDesk Mobile application for iOS and Android. It is supplied with free HWg-PDMS software to create graphs and export data to MS Excel.

STE2 is a device with SNMP support designated for measuring temperature and humidity from external sensors, with the option of connection to the internet via Ethernet or WiFi. In case the permitted range of values is exceeded, STE2 sends an alarm via e-mail, via the SensDesk portal or via SMS using standalone HWg-SMS-GW3 gateway in the same LAN.

 

Product canceled
New productSTE2 R2
Features: 
  • 2x 1-Wire Input for Sensors; 2x Digital Input for Detectors, Supports up to 3 sensors 1-Wire sensors from the HW group portfolio
  • Alarm alerts by e-mail and text messages (SMS)
  • M2M communication protocols: SNMP, XML, HWg-Push, WWW interface (HTTP) where safe ranges for sensors can be configured
  • Connected via LAN and Wifi (simultaneous connection possible). Configuration via built-in web server.
  • NMS connectivity (SNMP MIB); simple installation; supports DHCP; supports TLS authentication (Gmail).
  • A sensor value out of a set safe range as well as a DI state change sends an alert by e-mail, SMS or Ring.For Ring or SMS alarm use the HWg-SMS-GW3 gateway in the same LAN.
  • 5V power supply or PoE.
  • With the enclosed HWg-PDMS software, logged data can be exported to MS Excel.
  • Compatible with a range of third party SW. Examples for programmers on using the product are available in the HWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA and more).
Applications and usage: 
  • Air conditioning failure
  • Heating optimisation
  • HVAC supervision
  • Monitoring of refrigerator or freezer
  • Food storage

Horizontal menu

STE2: features for IoT projects

  • Data transfer over Ethernet / WiFi
  • Quick view to current data on SensDesk web portal
  • Mobile application, desktop apps
  • Sending data by e-mail, custom sw or cloud third-party applications
  • Use standard TCP and SNMP protocols
  • The STE2 units have a dual interface Ethernet and WiFi. Data can be transmitted via the HWg-Push protocol to the SensDesk public portal or HWg-PDMS software.
  • The Sensesk IoT portal provides quick previews of current values on the mobile phone as well, or it can display graphs of measured values up to 3 months back. It also includes the ability to set alarm messages via e-mail or SMS (with own HWg-SMS-GW3 gateway) in a cloud-like web page.
  • IoT PDMS software allows to collect all measured data and convert it to Excel format. It can then perform its own analysis. Excel reports from PDMS can be used to document environmental values for control bodies, for example, in pharmacies and food industry.
  • Thanks to SNMP support, values from STE2 can easily be accessed in other 3rd party IoT portals.
  • STE2 is a typical representative of simple and reliable IoT solutions because it provides the ability to measure up to 5 values including two binary contacts and communicates with a reliable TCP protocol with the security of data delivery. Real-time tracking supports the use of timestamp for transmitted data. 
     

You will have a complete overview

HWg-PDMS software is provided free-of-charge with the STE 2 device, allowing you to transfer the measured values to graph form and to export data to MS Excel. You can easily create comprehensible reports with graphical representations of temperature in one or a number of locations. When communicating with other devices, the STE 2 device uses the following communication protocols: SNMP, XML, HWg-Push.

Choose what you want to monitor

Are you only interested in the temperature and humidity, or do you need to know something else? Up to three different temperature and humidity sensors can be attached to the device. It also has two additional DI inputs for potential-free contact. You can also monitor door opening or movements in a particular room.
 
Follow everything online

You can choose whether to connect the STE2 thermometer to the internet via a RJ45 Ethernet cable (100BASE-T), which also supports a PoE power supply, or by using the built-in 2.4GHz Wifi antenna (802.11 b/g/n). The device also has a built-in WEB server, so you will not need any software apart from a standard web browser. We will provide you with free access to the SensDesk.com online portal, where you can store all your data and via which the device can send you alarm messages. The security of your data is password-protected.

STE2 - remote monitoring system by HW group

Recommended products

HWg-PDMS

Windows application for collecting data from sensors and inputs over GSM (HWg-Ares) and LAN (Poseidon, Damocles, HWg-STE, HWg-PWR).

SMS-GW3 LTE

SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.

Temp 1Wire Pt1000

High precision temperature sensor -50 °C to 200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments, a

Temp-1Wire 3m calibrated - On request

Temperature sensor (-10°C to +80°C)

HTemp-1Wire 3m

Digital temperature and humidity sensor for indoor and outdoor use.

Temp-1Wire-Flat 3m

A stainless steel temperature probe with a flat cable.

STE2 R2

STE2 R2 is reliable environmental monitoring for remote locations. LAN & WiFi, Email alerts, SNMP monitoring or cloud service available. External RJ11 sensors (up to 5 sensor values) and On/Off detectors (2x DI - Digital Input) can be connected.

The STE2 R2 package includes a power adaptor and 3m temperature outdoor sensor for remote temperature measurement.
Sensor values are displayed via the device's web interface, in SNMP or XML API, on the Portal or HWg Monitor mobile app. Device can be connected to the network via WIFI or LAN (RJ45) with PoE power support.

Features: 
  • Connectivity: LAN, WiFi
  • 2x RJ11 port (1W-UNI) up to 5 sensor values in total
  • 2x DI (Digital input) for dry contacts
  • Temperature sensor (IP67 - 3m) included in the retail package
  • Power adapter (International = EU, UK, US) included in the retail package
  • SMS messages & Voice Calls available with SMS-GW (external device) or Portal usage
  • Product with OPEN API (SNMP, XML) SNMP, PoE (Power Over Ethernet) supported
  • Default portal (optional): HWg-cloud.com (free service)
  • Compatible portals: SensDesk Technology
  • Mobile App: HWg Monitor (LAN or Portal connectivity)
Applications and usage: 
  • Remote datacenter environment monitoring & alerting
  • Detection of water leakage (spot/sensing cable detector)
  • Remote temperature monitoring in IT
  • Remote air conditioning control (A/C unit cooling failure alert)
  • Food / Drug storage (control of storage conditions, creation of HACCP logs using application software)
  • Monitoring of temperature, relative humidity, electric current, CO2
 

Horizontal menu

Sensors

Additional sensors can be connected to a second RJ11 sensor port (% RH, Cryo temperatures, CO2, VoC, 4-20mA, water flood, …). RJ11 sensors can be daisy-chained or one physical sensor can measure several values (°C + %RH + VoC = 3 values).

Up to 5 external RJ11 sensor values in total can be connected to STE2 R2.

Compatible Sensors & Detectors

 

Up to 5 external sensors (RJ11) + 2 DI detectors can be connected to the STE2 R2 device. 

 

 

Setting the device

  • Connect the STE2 R2 Thermometer to the network via a LAN or by using the built-in WiFi antenna.
  • The device has a built-in WEB server, you will need only a standard web browser. HTTPS is also supported.
  • Connect external sensors + detectors
  • Define Alerts
    • The device will alert you by email when the sensor value exceeds "Safe range" or the DI input is closed.
    • Email can be delayed or sent periodically. STE2 R2 supports also TLS so the Gmail SMTP servers can be used.
    • Use external SMS- GW3 for SMS alerts

 

Alarming and displaying of sensor values

When the measured temperature (Relative Humidity, Voltage, ..) on the external sensor(s) exceeds the defined Min-Max range (Safe Range), the STE2 device sends an email alert.

Email alerts from the device

  • Use 3rd party SMTP server and send email alerts from the STE2 device directly.
  • For long-term alerting stability be careful about using "public webmail" SMTP server like gmail.com yahoo.com and others. We do not recommend using these services, they are changing their security requirements in time and customers can simply lose alarm from the device.
  • We recommend using the Portal (HWg-cloud.com for free) & send email alerts from the Portal. It's long-term and more reliable.

Alerting via external SMS Gateway

  • SMS-GW3 or SMS-GW3 LTE are physical gateway devices from HW group with LAN interface.
  • One SMS GW can be used for forwarding alerts from several devices on the same LAN.
  • An alert can be sent as SMS or Voice call to a defined phone number.
  • No portal or software is required.

Sensor values display in your pocket (on the wall): HWg Monitor

  • The HWg Monitor is a Mobile App (Android or iOS) for displaying of sensor values
  • Data input: LAN devices (All HWg products) / Portal user account
  • All sensor values are on one screen.
  • Showing preferred sensors on the widget.

Free Portal service: HWg-cloud.com

  • The www.HWg-cloud.com is a free service from HW group for up to 20 devices in one user account.
  • Alerting: An email alert can be sent from the portal (higher long-term reliability compared to public SMTP server)
  • Alerting: Device Invalid (disconnected) alert from the portal is available
  • Simple alarm escalation is available (emails only)
  • Sensor value graphs are available
  • Switching remote relay output based on sensor values.
  • Central alerts overview & management.

Paid Portal service (Portal providers)

  • SensDesk Technology portal (SaaS or On-premise)
  • Email, SMS, Voice call alerts
  • Multi graphs with several years of history
  • User account API: SNMP or XML
  • Reports (PDF)
  • Multi-users accounts
  • Check the Portal Providers list to find your local service provider.

 

Follow our application notes

 

Hwg Video Flyer about STE2 R2 monitoring device

STE2 Video manuals

To give you a closer look at how STE2 device works, we have prepared a new series of video manuals. In these videos, we will explore the STE2 r2 device in more detail.

>> View the whole STE2 R2 video manual series

>> Watch the STE2 playlist on HWg YouTube channel

Recommended products

Temp-1Wire IP67 (1m, 3m, 10m)

Temperature sensor with IP67 protection for general use.

Temp-1W-UNI Pt100 Frost

Pt-100 based low temperatures sensor with 1-Wire UNI output.

SMS-GW3 LTE

SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.

HTemp-1Wire-Box2

Wall mount temperature and humidity sensor.

Temp 1Wire Pt1000

High precision temperature sensor -50 °C to 200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments, a

HTemp-1Wire 3m

Digital temperature and humidity sensor for indoor and outdoor use.

Temp-1Wire-Flat 3m

A stainless steel temperature probe with a flat cable.

Optical Smoke Detector FDR26

Optical Smoke Detector FDR26 for smoke detection and fire alarm signalization.

PowerEgg2

PowerEgg2 detects failures of a power supply and can be also controlled with a relay.

Sensor WLD Relay 1W-UNI

A universal WLD (Water Leak Detection) sensor, with one WLD sensing cable input and 2 kind of outputs (1W-UNI sensor and relay output).

Sensor 0-20mA 1W-UNI

Converter with isolated 0-20 mA AI (Analog Input) for external source probes and RJ11 output (1W-UNI).

Power Detector

Detector of 110/230V voltage failure, which can be connected directly to a wall plug.

30A DC Current probe 1W-UNI

Sensor for direct measuring of DC current of up to 30A

Flood detector 1W-UNI 3m

Water flood sensor (point detection) with 1W-UNI interface.

HWg-STE

Product canceled New product Available

HWg-STE can connect up to two sensors of temperature or humidity via RJ11 (1-Wire).

A built-in web server is used for configuring. The device can be monitored remotely over the internet via SNMP. It is supplied with external temperature probe (3m cable), power adaptor and free HWg-PDMS software to create graphs and export data to MS Excel.

HWg-STE is a device for measuring temperature and humidity from external sensors, with the option of connection to the internet via Ethernet. In case the permitted range of values is exceeded, HWg-STE sends an alarm via e-mail (SMTP TLS is not supported).

Product canceled
New productSTE2 LITE
Features: 
  • 2x RJ11 (1-Wire) port for Sensors
  • 2x E-mail alert (no SMTP TLS)
  • M2M communication protocols: SNMP, XML
  • Connected via LAN. Configuration via built-in web server.
  • NMS connectivity (SNMP MIB); simple installation; supports DHCP.
  • A sensor value out of a set safe range sends an alert by E-mail.
  • With the HWg-PDMS software, logged data can be exported to MS Excel.
  • Compatible with a range of third party SW. Examples for programmers on using the product are available in the HWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA and more).
Applications and usage: 
  • Air conditioning failure
  • Heating system monitoring
  • Cooler/freezer monitoring
  • Heating optimization
  • Food storage
  • Remote rack monitoring

Horizontal menu

HWg-STE is an Ethernet thermometer (hygrometer) with SNMP and WEB interfaces. Web thermometer with a LAN connection, built-in web interface and SNMP support and free software for creating MS Excel reports. Sends an e-mail alert if the temperature goes out of a specified range. Typical applications include monitoring the temperature of equipment, computers or disk arrays, or monitoring HVAC operation.

Warning: HWg-STE do not support SMTP TLS. To sending email alerts via Gmail SMTP server for example use the STE2 device.

The chart in the interface is based on Adobe Flash whose support ends at the end of 2020. 

Chart in the interface

There is no loss of functionality as you can view your graphs via PDMS software.

PDMS