Ares 12 LTE is an industrial unit for remote monitoring and alarming over LTE for locations without LAN access. Includes battery backup. Connect up to 14 external sensors and 2 dry contact detectors.
Ares 12 LTE monitors the readings of connected sensors.
When a value reaches the alarm threshold, the device sends an e-mail or a text message (SMS), or dials specified numbers. Use a SensDesk Technology portal to view measured data in a complex dashboard.
Ares 12 LTE includes an internal battery that provides back-up power for up to 24 hours.
Ares 12 LTE products support FOTA (Firmware Over The Air) for remote firmware updates.
- 14x 1-Wire UNI/1-Wire Input; 2x Digital Input with S0 pulse counters; Data Logger for more than 250.000 recordss; Digital Inputs feature 32-bit pulse counters that retain their value even if the power fails
- 5x E-mail; 5x "SMS+Ring"
- Internal battery provides back-up power for up to 24 hours.
- Use the USB interface to configure the device from a PC with no need to install any additional software. Remote configuration also possible via the “AresConf” tab in the SensDesk portal.
- Remote firmware upload (FOTA) capability makes Ares devices ideal for large-scale deployments.
- Connected via LTE and GSM/GPRS.List of APN available worldwide.
- A sensor value out of a set safe range as well as a DI state change sends an alert by e-mail or "SMS+Ring", or activates a relay (via connected accessory "Relay Output 1-Wire UNI").
- Data can be sent in e-mail attachments or downloaded via USB.
- Compatible with a range of third party SW (SCADA etc.). Examples for programmers on using the product are available in the HWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA and more).
- LTE connection
- GPRS monitoring of machines and their environment
- ATMs – environment monitoring without tampering with the connection
- Art exhibits and depositories
- Storages of food or materials
- Cooling systems and coolers
Ares 12 LTE: Features for IoT projects
- Data transfer over the LTE/GSM / GPRS mobile network
- Quick view of current data on SensDesk web portal
- Mobile applications, desktop apps
- Sending data by e-mail, custom SW or third-party cloud applications
Ares 12 LTE units allow connecting to the Internet via an LTE/GSM/GPRS network. Data is transmitted via the HWg-Push protocol to the SensDesk public portal
The SensDesk IoT portal provides a quick view of current values on the mobile phone as well. It can display graphs of measured values up to 2 years back. It also includes the ability to set alarm messages via e-mail or SMS (with its own HWg-SMS-GW3 gateway) on a cloud-like web page.
Ares 12 LTE is ideal for outdoor or mobile IoT applications because it has wide signal coverage thanks to GSM and LTE communications. Switching between BTS (base station - network cell) is up to 180 km/h automatic and without loss of communication.
Differences between Ares 10 vs. Ares 12
Ares 10 | Ares 12 | |
---|---|---|
1-Wire UNI sensors | 6x | 14x |
External outputs | NO | YES |
Battery | NO | YES |
Video Flyer about Ares 12 device
Recommended products
Expander 4xDI 1W-UNI
Expansion module for connection of 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc.
Relay Output 1W-UNI
External Relay output 1W-UNI module allows to expand Ares 12 functionality by remote control of up to 4 relay outputs with a dry contact (NO/NC) capable of u
Sensor CO2 1W-UNI
Combined Temperature (-0 to +50 °C), Relative Humidity (RH 0-95%) and CO2 (300 - 40000 ppm) sensor in one box. RJ11 interface (1-Wire UNI bus)
Sensor THPVoc 1W-UNI
Temperature, Humidity, atmospheric Pressure, TVoc sensor (-30 to 70 °C, 0 to 100% RH, 300 – 1 000 hPa, 0 – 60 000 ppb), indoor box with RJ11 (1-Wire UNI) int
HTemp HomeBox
Combined temperature sensor -30 ° C to +70 ° C and humidity sensor 0-100% RH, for wall mounting RJ11 (1-Wire)
HTemp HomeBox
Combined temperature sensor -30 ° C to +70 ° C and humidity sensor 0-100% RH, for wall mounting RJ11 (1-Wire)
Sensor 230V AC 1W-UNI
The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.
Sensor 4-20mA 1W-UNI
Converter with isolated 4-20 mA AI (Analog Input) for external current sink probes and RJ11 output (1W-UNI).
HWg-Ares 12
Industrial measuring and monitoring for 14 sensors with GSM communication and back-up power.
UPS 12V and 5V
The "UPS 12V and 5V" is a backup power source for devices with 12V as well as 5V DC power supply which can be powered by the UPS simultaneously.