environment monitoring system

STE2 PLUS SMS-GW

STE2 PLUS SMS-GW is a bundle package of STE2 PLUS monitoring unit and LTE version of SMS gateway for SMS and Call alerting.

  • To STE2 PLUS can connect up to 15 external sensors to 2x RJ11 ports.
    LAN & WiFi monitoring device STE2 PLUS is a professional product with HTTPS custom certificates, SNMPv3, SNMP Traps and IPv6.
  • The SMS-GW3 LTE is a central gateway that allows to HWg devices or SensDesk portals to send text messages (SMS) and make voice calls alerts.

This bundle package with 2 devices is a cost effective way to build a remote monitoring installation with SMS / Call alerts included even without the Portal. SMS GW device can be used by other HWg devices as central point to transmit SMS & Calls even from other HWg devices.

Features: 
  • STE2 PLUS thermometer included (LAN / WiFi)
  • Temperature sensor (IP67 - 3m) included in the retail package
  • SMS-GW3 LTE gateway included with external antenna
  • 2x wall plug power adaptor (International = EU, UK, US)
  • SMS/Calls GW for all HWg devices (RME)
  • SMS/Calls GW for any SNMP based software (NAGIOS for example)
Applications and usage: 
  • Remote technical rooms monitoring
  • SNMP / Email alerting with GW for SMS / Calls included.
  • Remote monitoring of refrigerator or freezer (alert when refrigerator fails, logging of operating and storage conditions)
  • Single SMS gateway for the entire network (other HWg devices) with an easy-to-use web-based configuration

Horizontal menu

STE2 PLUS sensors

Up to 15 external temperature sensor values can be connected to STE2 PLUS. Sensors can be daisy-chained from RJ11 port. One physical sensor can measure several values (°C + %RH = 2 sensor values). The maximum limit is 15 sensor values in total.

Compatible Sensors & Detectors

 

 

 

 

SMS-GW3 LTE

SMS-GW3 LTE is LTE gateway for sending SMS messages from several HWg devices.

It's part of the bundle with STE2 PLUS because of the "Device-to-GW" mode.

Customers with HWg monitoring devices are using one SMS-GW for alerting. Several HWg devices (on the same LAN) can connect to a single SMS-GW to send alarm alerts (SMS/voice calls) to different phone numbers. No extra software is needed, and it works over the local network using Box-2-Box (Peer-to-Peer) communication.

 

 

HWg Video Flyer about SMS-GW3 LTE device

HWg Video Flyer about STE2 PLUS device

STE2 Video manuals

To give you a closer look at how STE2 device works, we have prepared a new series of video manuals. In these videos, we will explore the STE2 r2 device in more detail.

>> View the whole STE2 R2 video manual series

>> Watch the STE2 playlist on HWg YouTube channel

 

 

Recommended products

Temp-1Wire IP67 (1m, 3m, 10m)

Temperature sensor with IP67 protection for general use.

HTemp-1Wire-Box2

Wall mount temperature and humidity sensor.

SMS-GW3 LTE

SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.

Expander 4xDI 1W-UNI

Expansion module for connection of 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc.

Sensor CO2 1W-UNI

Combined Temperature (-0 to +50 °C), Relative Humidity (RH 0-95%) and CO2 (300 - 40000 ppm) sensor in one box. RJ11 interface (1-Wire UNI bus)

Sensor 230V AC 1W-UNI

The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.

Temp-1Wire Pt100 Frost

Precise industrial temperature sensor -200 to +160 °C

HTemp-1Wire Rack 19

Combined temperature and humidity probe for IT environment.

Temp-1Wire Pt100

High precision temperature sensor -50 °C to +200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments,

HTemp-1-Wire Outdoor

Temperature and humidity sensor for outdoor use.

Flood detector 1W-UNI 3m

Water flood sensor (point detection) with 1W-UNI interface.

Gas Leak Detector

Detector for indication of flammable gas presence.

Optical Smoke Detector FDR26

Optical Smoke Detector FDR26 for smoke detection and fire alarm signalization.

STE2 PLUS

STE2 PLUS is a professional LAN & WiFi remote sensors monitoring product. You can connect external sensors (up to 15 values) to 2x RJ11 ports. External detectors can be connected to 2x DI (Digital Input). The STE2 PLUS is a professional product with HTTPS custom certificates, SNMPv3, SNMP Traps and IPv6.

The STE2 PLUS package includes a power adaptor and 3m outdoor temperature sensor for remote temperature measurement. The device can be connected to the network via WIFI or LAN (RJ45) with PoE power support.

Sensor values are displayed via the device's web interface, in API (SNMP or XML) on the Portal or on the mobile/tablet screen (HWg Monitor).

Features: 
  • Connectivity: LAN, WiFi
  • 2x RJ11 port (1W-UNI) up to 15 sensor values in total
  • 2x DI (Digital input) for dry contacts
  • Temperature sensor (IP67 - 3m) included in the retail package
  • Power adapter (International = EU, UK, US) included in the retail package
  • SMS messages & Voice Calls available with SMS-GW (external device) or Portal usage
  • Professional product features: IPv6, SNMP Traps, SNMP v3, VDO, HTTPs (customer certificate), PoE (Power Over Ethernet)
  • Default portal (optional): HWg-cloud.com (free service)
  • Compatible portals: SensDesk Technology
  • Mobile App: HWg Monitor (LAN or Portal connectivity)
Applications and usage: 
  • Remote technical rooms monitoring
  • Drug storage with reports from Portal
  • Food storage (control of storage conditions, creation of HACCP logs using application software)
  • Building environment monitoring
  • Remote monitoring of refrigerator or freezer (alert when refrigerator fails, logging of operating and storage conditions)
  • Detection of water flooding at the point
  • Heating optimization (savings in heating and air conditioning costs)

Horizontal menu

Sensors

Up to 15 external temperature sensor values can be connected to STE2 PLUS. Sensors can be daisy-chained from RJ11 port. One physical sensor can measure several values (°C + %RH = 2 sensor values). The maximum limit is 15 sensor values in total.

Compatible Sensors & Detectors

 

 

 

Unique STE2 PLUS features

  • SNMP v3 is secured version of SNMP protocol. Together with SNMP Traps feature upgrading STE2 PLUS to professional SNMP environment monitoring device.
  • 8x VDO (Virtual Digital Output) gives the STE2 PLUS the ability to control relay outputs on other LAN devices
  • The Alarm Reminder repeats information about the duration of the alarm condition as long as the condition persists.
  • IPv6 support is important for some telco operators and bigger customers.

 

Setting the device

  • Check the First Steps page or product PDF manual. 
  • Connect the STE2 PLUS device to the network (LAN).
  • Check the IP address with HWg-Config Windows App.
  • Open the device's built-in WEB server.
  • Connect external sensors, and name them
  • Define Alerts (SafeRange for each sensor / Alarm state for DI detectors)

 

Alarming and displaying of sensor values

When the measured temperature (Relative Humidity, Voltage, ..) on the external sensor(s) exceeds the defined Min-Max range (Safe Range), the STE2 device sends an email alert.

Email alerts from the device

  • Use 3rd party SMTP server and send email alerts from the STE2 device directly.
  • For long-term alerting stability be careful about using "public webmail" SMTP server like gmail.com yahoo.com and others. We do not recommend using these services, they are changing their security requirements in time and customers can simply lose alarm from the device.
  • We recommend using the Portal (HWg-cloud.com for free) & send email alerts from the Portal. It's long-term and more reliable.

Alerting via external SMS Gateway

  • SMS-GW3 or SMS-GW3 LTE are physical gateway devices from HW group with LAN interface.
  • One SMS GW can be used for forwarding alerts from several devices on the same LAN.
  • An alert can be sent as SMS or Voice call to a defined phone number.
  • No portal or software is required.

Sensor values display in your pocket (on the wall): HWg Monitor

  • The HWg Monitor is a Mobile App (Android or iOS) for displaying of sensor values
  • Data input: LAN devices (All HWg products) / Portal user account
  • All sensor values are on one screen.
  • Showing preferred sensors on the widget.

Free Portal service: HWg-cloud.com

  • The www.HWg-cloud.com is a free service from HW group for up to 20 devices in one user account.
  • Alerting: An email alert can be sent from the portal (higher long-term reliability compared to public SMTP server)
  • Alerting: Device Invalid (disconnected) alert from the portal is available
  • Simple alarm escalation is available (emails only)
  • Sensor value graphs are available
  • Switching remote relay output based on sensor values.
  • Central alerts overview & management.

Paid Portal service (Portal providers)

  • SensDesk Technology portal (SaaS or On-premise)
  • Email, SMS, Voice call alerts
  • Multi graphs with several years of history
  • User account API: SNMP or XML
  • Reports (PDF)
  • Multi-users accounts
  • Check the Portal Providers list to find your local service provider.

 

Follow our application notes

 

HWg Video Flyer about STE2 PLUS device

STE2 Video manuals

To give you a closer look at how STE2 device works, we have prepared a new series of video manuals. In these videos, we will explore the STE2 r2 device in more detail.

>> View the whole STE2 R2 video manual series

>> Watch the STE2 playlist on HWg YouTube channel

 

 

Recommended products

Temp-1Wire IP67 (1m, 3m, 10m)

Temperature sensor with IP67 protection for general use.

HTemp-1Wire-Box2

Wall mount temperature and humidity sensor.

SMS-GW3 LTE

SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.

Expander 4xDI 1W-UNI

Expansion module for connection of 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc.

Sensor CO2 1W-UNI

Combined Temperature (-0 to +50 °C), Relative Humidity (RH 0-95%) and CO2 (300 - 40000 ppm) sensor in one box. RJ11 interface (1-Wire UNI bus)

Sensor 230V AC 1W-UNI

The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.

Temp-1Wire Pt100 Frost

Precise industrial temperature sensor -200 to +160 °C

HTemp-1Wire Rack 19

Combined temperature and humidity probe for IT environment.

Temp-1Wire Pt100

High precision temperature sensor -50 °C to +200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments,

HTemp-1-Wire Outdoor

Temperature and humidity sensor for outdoor use.

Flood detector 1W-UNI 3m

Water flood sensor (point detection) with 1W-UNI interface.

Gas Leak Detector

Detector for indication of flammable gas presence.

Optical Smoke Detector FDR26

Optical Smoke Detector FDR26 for smoke detection and fire alarm signalization.

Perseus Monitoring 155

Perseus Monitoring 155 is a complex 1U solution for a 19” rack remote monitoring system (data centers, AV installations). Connect external physical sensors (°C, %RH, A, V, …), Detectors (relay / dry contact) or WLD (Water Leak Detection) sensing cable. 3rd party meters (sensors) can also be connected via LAN or Modbus/RTU. LTE backup connectivity allows the device to stay operational in case of an Ethernet outage.

Perseus 155 combines data from external physical sensors / detectors with data from other HWg devices connected via LAN. Local conditions, Lua scripting, calendar or periodic scheduler help to analyze the measured data.

Email or SNMP Trap alert can be sent from the Perseus device, as well as SMS and Calls. Measured values are available via Open API (XML, Modbus/TCP, MQTT).

Perseus Monitoring 155 can be connected to the Portal (SensDesk technology). Together with the Portal it’s a powerful solution for professional applications.

A unique feature of Perseus products is the Meters API. Perseus can read over LAN sensor values from other devices (e.g. STE2 R2) and use this data for analysis or alerting.

The Perseus Monitoring 155 unit includes a built-in LTE modem that serves as an SMS gateway for Perseus itself as well as other connected HW group devices.

Features: 
  • Ethernet: RJ45 (100BASE-T); WEB: Built-in web server
  • LTE: Global
  • Sensors: 8xRJ11 port - max. 100 external sensors (1-Wire / 1-Wire UNI)
  • RJ11 sensors: Temperature, Relative Humidity (Indoor / Outdoor), Voltage, Current (0-30A or 4-20mA) and much more
  • RS-485 (Modbus/RTU): 1x terminal block
  • WLD: 1 zone for external Water Leak Detection sensing cable
  • DO (Digital Outputs): 4x DO (relays)
  • DI (Digital Inputs): 16x DI (dry contact)
  • Detectors: Smoke, door contact, fan failure detector, power presence, etc
  • Device Alerts: SNMP trap, email, SMS / Calls
  • Portal Alerts: Email, SMS / Calls, Device Invalid Alert
  • Open API: SNMP, XML, Modbus/TCP, MQTT
  • Professional product: IPv6, SNMP Traps, SNMP v3
  • Security: Radius - IEEE 802.1X, Admin and user accounts, HTTPs (customer certificate)
  • Meters API (LAN): HWg devices XML, Modbus/TCP, SNMP, MQTT
  • Data processing: Condition & Actions, Virtual sensors, Scheduler
Applications and usage: 

Typical Applications:

  • Remote site data concentrators from all local sensors / meters
  • Remote environmental monitoring inside the cabinet or telco site 
  • Data Center / Single rack monitoring
  • Remote technical room monitoring
  • Telecommunication installations 
  • Remote infrastructure monitoring

 

Horizontal menu

Perseus Monitoring 155 is a 19" rack mount device for environmental monitoring of a data center cabinet or entire server room. Up to 100 external meters (sensors) with 1000 values (variables) can be connected.

Within one 19” rack unit there are useful 8 RJ11 ports for external 1W-UNI sensors, 16 DI ports (dry contacts), 1 WLD zone input for Water Leak Detection sensing cable, and 4 relay outputs. Perseus 155 can be powered from 9-30V, -48V or from PoE.

The combination of the RS-485 physical interface on the Perseus 155 and the Modbus/RTU Meters API allows data to be read from third party electricity meters, UPS or air conditioning products.

Perseus Monitoring 155 has a WLD zone input and 4 relay outputs that can be controlled via the device’s interface or according to the value of a connected sensor or detector, for example to control air conditioning, ventilation or automatic doors.

Alerting options

A typical application example is monitoring temperatures in a remote warehouse with freezers. There are 4 temperature sensors (inside the fridge / freezers), up to 60m 1W-UNI physically connected to Perseus 145. External UPS with SNMP support can be monitored by SNMP (battery status).
Unit electronic equipment monitoring, storage rooms and industrial facilities. From simple high temperature alarms to advanced alerts (2 out of 5 sensors exceeded limit or are inaccessible, send the alert to a recipient according to internal scheduler configuration).

Standalone monitoring

  • Email alert can be sent from the device (requires SMTP server)
  • Internal LTE modem can call to defined number / send SMS message as alert 
  • Switching DO relay based on defined sensor(s) values(s)
  • Perseus Open API is available (SNMP, Modbus/TCP, MQTT, …)

Using Portal service (HWg-cloud.com):

  • Email alert can be sent from the Portal (higher long-term reliability)  
  • Device Invalid (disconnected) alert is available from the Portal
  • One value graph with short history is available
  • Alarm escalation is available (email only)
  • Remote relay output switching based on sensor 
  • Central alerts overview & management
  • Free of charge service from HW manufacturer

Using paid Portal service (Portal providers):

  • SensDesk Technology portal (SaaS or On-Premise) 
  • Email, SMS, Voice call alerts
  • Multigraphs with several years of history
  • User account API: SNMP or XML
  • Reports (PDF)
  • Multi-user accounts

Mobile App: HWg Monitor

  • Android and iOS versions 
  • Device connection LAN: All HWg devices 
  • Device connection Portal: SensDesk.com + some Portal Providers
  • All sensor values on one screen
  • Mobile App can be used as sensor values display on the wall

 

Recommended products

RM2 brackets 19

19'' cabinet/rack mounting brackets for Perseus Monitoring 150/155

HTemp-1Wire Rack 19

Combined temperature and humidity probe for IT environment.

WLD sensing cable A

WLD sensing cable type A. Water is detected along the entire length of the WLD sensing cable.

GSM SMA antena quadband

GSM antenna quadband with SMA connector for 2G / LTE devices

Perseus Monitoring 150

Perseus Monitoring 150 is a complex 1U solution for a 19” rack remote monitoring system (data centers, AV installations). Connect external physical sensors (°C, %RH, A, V, …), Detectors (relay / dry contact) or WLD (Water Leak Detection) sensing cable. 3rd party meters (sensors) can also be connected via LAN or Modbus/RTU.

Perseus 150 combines data from external physical sensors / detectors with data from other HWg devices connected via LAN. Local conditions, Lua scripting, calendar or periodic scheduler help to analyze the measured data.

Email or SNMP Trap alert can be sent from the Perseus device. Measured values are available via Open API (XML, Modbus/TCP, MQTT).

Perseus Monitoring 150 can be connected to the Portal (SensDesk technology). Together with the Portal it’s a powerful solution for professional applications.

A unique feature of Perseus products is the Meters API. Perseus can read over LAN sensor values from other devices (e.g. STE2 R2) and use this data for analysis or alerting.

Features: 
  • Ethernet: RJ45 (100BASE-T); WEB: Built-in web server
  • Sensors: 8xRJ11 port - max. 100 external sensors (1-Wire / 1-Wire UNI)
  • RJ11 sensors: Temperature, Relative Humidity (Indoor / Outdoor), Voltage, Current (0-30A or 4-20mA) and much more
  • RS-485 (Modbus/RTU): 1x terminal block
  • WLD: 1 zone for external Water Leak Detection sensing cable
  • DO (Digital Outputs): 4x DO (relays)
  • DI (Digital Inputs): 16x DI (dry contact)
  • Detectors: Smoke, door contact, fan failure detector, power presence, etc
  • Device Alerts: SNMP trap, email, (SMS / Calls with external SMS GW)
  • Portal Alerts: Email, SMS / Calls, Device Invalid Alert
  • Open API: SNMP, XML, Modbus/TCP, MQTT
  • Professional product: IPv6, SNMP Traps, SNMP v3
  • Security: Radius - IEEE 802.1X, Admin and user accounts, HTTPs (customer certificate)
  • Meters API (LAN): HWg devices XML, Modbus/TCP, SNMP, MQTT
  • Data processing: Condition & Actions, Virtual sensors, Scheduler
Applications and usage: 

Typical Applications:

  • Remote site data concentrators from all local sensors / meters
  • Remote environmental monitoring inside the cabinet or telco site 
  • Data Center / Single rack monitoring
  • Remote technical room monitoring
  • Telecommunication installations 
  • Remote infrastructure monitoring

Horizontal menu

Perseus Monitoring 150 is a 19" rack mount device for environmental monitoring of a data center cabinet or entire server room. Up to 100 external meters (sensors) with 1000 values (variables) can be connected.

Within one 19” rack unit there are useful 8 RJ11 ports for external 1W-UNI sensors, 16 DI ports (dry contacts), 1 WLD zone input for Water Leak Detection sensing cable, and 4 relay outputs. Perseus 150 can be powered from 9-30V, -48V or from PoE.

The combination of the RS-485 physical interface on the Perseus 150 and the Modbus/RTU Meters API allows data to be read from third party electricity meters, UPS or air conditioning products.

Perseus Monitoring 150 has a WLD zone input and 4 relay outputs that can be controlled via the device’s interface or according to the value of a connected sensor or detector, for example to control air conditioning, ventilation or automatic doors.

Alerting options

A typical application example is monitoring temperatures in a remote warehouse with freezers. There are 4 temperature sensors (inside the fridge / freezers), up to 60m 1W-UNI physically connected to Perseus 145. External UPS with SNMP support can be monitored by SNMP (battery status).
Unit electronic equipment monitoring, storage rooms and industrial facilities. From simple high temperature alarms to advanced alerts (2 out of 5 sensors exceeded limit or are inaccessible, send the alert to a recipient according to internal scheduler configuration).

Standalone monitoring

  • Email alert can be sent from the device (requires SMTP server)    
  • Switching DO relay based on defined sensor(s) values(s)
  • Perseus Open API is available (SNMP, Modbus/TCP, MQTT, …)

Using Portal service (HWg-cloud.com):

  • Email alert can be sent from the Portal (higher long-term reliability)
  • Device Invalid (disconnected) alert is available from the Portal
  • One value graph with short history is available
  • Alarm escalation is available (email only)
  • Remote relay output switching based on sensor 
  • Central alerts overview & management
  • Free of charge service from HW manufacturer

Using paid Portal service (Portal providers):

  • SensDesk Technology portal (SaaS or On-Premise)
  • Email, SMS, Voice call alerts
  • Multigraphs with several years of history
  • User account API: SNMP or XML
  • Reports (PDF)
  • Multi-user accounts

Mobile App: HWg Monitor

  • Android and iOS versions
  • Device connection LAN: All HWg devices 
  • Device connection Portal: SensDesk.com + some Portal Providers
  • All sensor values on one screen
  • Mobile App can be used as sensor values display on the wall

 

Recommended products

SMS-GW3 LTE

SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.

RM2 brackets 19

19'' cabinet/rack mounting brackets for Perseus Monitoring 150/155

HTemp-1Wire Rack 19

Combined temperature and humidity probe for IT environment.

WLD sensing cable A

WLD sensing cable type A. Water is detected along the entire length of the WLD sensing cable.

Poseidon2 3268

Poseidon2 3268 supports up to 8 sensors connected over 1-Wire UNI / 1-Wire and up to 4 detectors connected to digital inputs. Poseidon2 3268 can control 2 digital NO/NC relay outputs, as well as up to 8 virtual digital outputs (VDO) at remote Poseidon2 or Damocles2 units (M2M).

A built-in web server is used for configuring. The device can be monitored remotely over the internet using any SensDesk Technology portal in combination with the SensDesk Mobile application for iOS and Android. It works with HWg-PDMS and HWg-Trigger.

Poseidon2 devices are designed to monitor and control sensors and digital I/O over the network using secure M2M protocols (HTTPs, IPv6, SNMPv3). With support for over 50 SNMP and SCADA applications, Poseidon2 devices can be integrated in a wide range of monitoring and control systems. MQTT protocol enables integration in IoT solutions.

Features: 
  • 8x 1-Wire UNI/1-Wire Input; 4x Digital Input; Data Logger for more than 250.000 records; Digital Inputs feature 32-bit S0 pulse counters that retain their value even if the power fails
  • 2x Relay Output NO/NC; 8x Virtual Digital Output
  • 5x SNMP Trap; 5x E-mail; 5x "SMS+Ring" (via external GSM gateway or modem)
  • MQTT compatibility allows connecting to IoT Hub, MS Azure, Bluemix Internet of Things and other cloud services.
  • Connected via LAN. Configuration via built-in web server.
  • A sensor value out of a set safe range as well as a DI state change sends an alert by e-mail, SMS, SNMP Trap, or activates a remote relay at another Poseidon2 of Damocles2 unit.
  • For Ring or SMS alarm use the HWg-Trigger software (external GSM modem required), or a HWg-SMS-GW3 gateway in the same LAN.
  • Virtual Digital Outputs (VDO) can be mapped to physical digital outputs (relays) of other Poseidon2 or Damocles2 units on the same LAN.
  • With the HWg-PDMS software, S0 pulses can be converted to cost per time period and exported to MS Excel.
  • Compatible with a range of third party SW (SCADA etc.). Examples for programmers on using the product are available in the HWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA and more).
Applications and usage: 
  • Temperature alarms and a thermostat in IT
  • Switching HVAC / ventilation in a cabinet
  • Remote I/O control and monitoring over the Ethernet
  • Surveilance systems
  • Industrial applications
  • Cooler and freezer monitoring + alarm indication
  • Temperature and other measurements in a cloud
  • Online web portal + mobile app
  • Smart buildings

Horizontal menu

Web schema Poseidon2 3268

 

Poseidon2: Solution for Industrial Internet of Things

  • Data transfer via Ethernet
  • Quick view of current data on SensDesk web portal
  • Sending data by e-mail, custom sw or cloud third-party applications
  • Use standard protocols HTTPs, IPv6, SNMPv3, MQTT

Poseidon2 and Damocles2 have a physical interface to classic Ethernet and represent the universal Internet of Things (IIoT) solutions. Thanks to the Ethernet interface, it is possible to transfer from the device current values and data stored in the device buffer.

The data can be transmitted via the HWg-Push protocol to the SensDesk public portal, HWg-PDMS software or 3rd party systems using the MQTT IO protocol. Data can also be emailed to PDMS, and the software will download it from the POP3 POP3 mailbox or its secured POP3S variant.

The SensDesk IoT portal provides quick previews of current values on the mobile phone as well, or it can display graphs of measured values up to 3 months back. It also includes the ability to set alarm messages via e-mail or SMS (with its own HWg-SMS-GW3 gateway) on a cloud-like web page.

IoT PDMS software allows collect all measured data and convert it to Excel format. It can then perform its own analysis. Excel reports from PDMS can be used to document environmental values for control bodies, for example, in pharmacies and the food industry.

IoT protocol MQTT is another option to connect Poseidon2 and Damocles2 to IoT portals such as MS Azure and others. Thanks to this, you can combine data from HW group units in one cloud (portal) with third-party devices. 
 

Remote I/O control and monitoring over the Ethernet

 Poseidon2 is connected to the LAN, reads measurements, and stores the measurements in its internal memory (data logger). I/O can be controlled over the Ethernet. Relay outputs can be controlled over the Web, or according to the value of a connected sensor (“IP Thermostat” or “IP Hygrostat” mode).

When a value is out of a specified range, Poseidon2 sends an e-mail, an SNMP Trap, or a text message (SMS). Text messages can be sent without any additional software through a single central gateway, the HWg-SMS-GW3 (optional device). Just a single SIM card can serve all your devices connected to one network.

The device can be accessed over the web interface, through the online portals based on SensDesk Technology or using a SensDesk Mobile app (Android, iPhone).

For data collection and monitoring, we recommend our HWg-PDMS application that displays graphs and exports data to MS Excel. For “IF-THEN” event management (e.g. “If one out of 10 devices fails, send an SMS to the admin”), we provide the “HWg-Trigger” application for Windows.

Poseidon2 3268 can be connected to various third-party applications or cloud services using various protocols (SNMPv3, Modbus/TCP, XML, HWg-Push).

 

Click here to compare Poseidon2 products

Recommended products

HTemp-1Wire 3m

Digital temperature and humidity sensor for indoor and outdoor use.

SMS-GW3 LTE

SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.

Door contact MK4

Security Door contact MK4 with 2m connection wiring.

Optical Smoke Detector FDR26

Optical Smoke Detector FDR26 for smoke detection and fire alarm signalization.

Temp 1Wire Pt1000

High precision temperature sensor -50 °C to 200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments, a

Temp-1Wire IP67 (1m, 3m, 10m)

Temperature sensor with IP67 protection for general use.

HTemp-1Wire Rack 19

Combined temperature and humidity probe for IT environment.

Temp-1Wire-Outdoor 3m

Outdoor temperature sensor with IP67 protection

Sensor WLD Relay 1W-UNI

A universal WLD (Water Leak Detection) sensor, with one WLD sensing cable input and 2 kind of outputs (1W-UNI sensor and relay output).

Sensor 60V 1W-UNI v2

Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output.

PowerEgg2

PowerEgg2 detects failures of a power supply and can be also controlled with a relay.