Sensor for direct measuring of DC current of up to 30A

Double converter to connect two Pt-100 and Pt-1000 probes to 1-Wire UNI (RJ11). One or two external temperature probes can be monitored over LAN Poseidon2) and GSM (Ares).

3 phase 380V M-Bus energy meter for direct measuring (max load 63A). Pulses & M-Bus data output - 3x230V/400V, (5)63A.

Expansion module for connection of 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc. to the 1-Wire UNI bus (RJ11).

Water flood sensor (point detection) with 1W-UNI interface.

CO2 concentration, temperature and humidity interior sensor with RS485 interface

Temperature and humidity sensor for outdoor use.

Combined temperature and humidity probe for IT environment.

Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with thePoseidon family units.

Temperature and humidity sensor Htemp-485 Modbus RTU T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be therefore used alone or with Poseidon units.

Temperature and humidity sensor HTemp-485 T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.

Simple light intensity sensor for indoor use. The sensor is designed for use with Poseidon and Ares devices via 1-Wire UNI bus (RJ11).

Single-phase electricity meter 45A with M-Bus

3 phase 380V M-Bus energy meter for direct measuring (max load 100A). Pulses & M-Bus data output - 3x230V/400V, 100A.

PIR Motion Detector

Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be used alone, or with Poseidon units.

Detector of 110/230V voltage failure, which can be connected directly to a wall plug. Galvanic insulated relay output (NO) can be connected to any digital input (DI) of any HW grup product.

Single-phase electricity meter 45A with ModBus

3 phase 380V ModBus energy meter for direct measuring (max load 100A). Pulses & ModBus data output - 3x230V/400V, 100A.

Temperature probe Pt100/B for low temperatures. Temperature range -190 to +150°C. PTFE covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm.

External Relay output 1W-UNI module allows to expand Ares 12 functionality by remote control of up to 4 relay outputs with a dry contact (NO/NC) capable of up to 50V / 1A load.

The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.

Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output.

Temperature, Humidity, atmospheric Pressure, TVoc sensor (-30 to 70 °C, 0 to 100% RH, 300 – 1 000 hPa, 0 – 60 000 ppb), indoor box with RJ11 (1-Wire UNI) interface.

Temperature sensor -30 ° C to +70 ° C for wall mounting RJ11 (1-Wire)

Pt-100 based low temperatures sensor with 1-Wire UNI output.

Temperature sensor with IP67 protection for general use.

Precise industrial temperature sensor -200 to +160 °C

A stainless steel temperature probe with a flat cable.

Temperature sensor for indoor usage at RS-485 bus with a simple communication protocol. The sensor can be used separately but is designed for connection to the Poseidon measuring unit and transmit temperature over SNMP, WEB

Temp-485-Pt100 Cable3

SS14 detects shocks and vibrations.